Your cart is empty.
Your cart is empty.Amazon.ca Product Description
22-Inch Ball Bearing Drawer Slides.
From the Manufacturer
22-Inch Ball Bearing Drawer Slides.
Luc Mongeau
Reviewed in Canada on January 16, 2025
I created new drawers to an existing cabinet and made the installation quite easy. They are soft and sturdy.
D. Kiefer
Reviewed in the United States on February 8, 2024
Used these for a large (4' x 2') keyboard in a custom desk, works like a charm, easy to install. Inner slides can be removed easily without hazard of losing ball bearings, easy to reinstall once mounted.
Hank
Reviewed in the United States on February 14, 2024
I’m progressively replacing all of the drawer slides in my kitchen and have tried a few different modes and brands. These Liberty slides hit the sweet spot for me. They are substantial enough to handle the two drawers that I have stacked with pots and skillets smoothly and with ease. They have a positive stop and lock close when pushed all of the way in. They’re not soft/auto close which I prefer. I’ve installed a few soft close slides on other smaller drawers and find them less smooth and somewhat more finicky to install. All in all these slides are substantial, smooth and easy to install. I’ll but using these Liberty slides for the rest of the larger drawers in my kitchen.
abdullah
Reviewed in Saudi Arabia on September 20, 2023
المفصلة متينةجدا و انزلاقها سلس و لا يتاثر بالوزن
Leatherstripper
Reviewed in Canada on June 7, 2021
I used this in to make drawers in our RV in a hard to access cupboard. It glides easily and is top quality.
Marty Lowry
Reviewed in Canada on May 20, 2021
Worked great until I transported new cabinets with drawer slides on a dusty cottage road. By time I got to cottage drawer slides were full of dirt and grit...note to self, cover any cabinets during transportation! Apart from this, slides are easy to install and work great.
David Lundy
Reviewed in the United States on June 23, 2019
As long as you follow directions (I didn't the first half of the install...d'oh!), the drawer slides go in really easily. They're very sturdy too. I actually only installed the front and middle screws (really hard to reach the back ones) and the drawer has absolutely zero flex when fully extended, unless I lean into it. I'd say the drawer could easily hold 10 lbs or more without issue.Some suggestions/recommendations:1. Get a "helping hand" tool to hold the slides; they're kinda heavy to hold with one hand while trying to negotiate a screwdriver with the other. I used masking tape, which was effective, but needed to be reapplied a couple of times.2. Pre-drill the screw holes! It seriously makes the screw installation about 100x easier.3 .You should also invest in either a very strongly magnetic screwdriver bit or one of those bits with the sleeve to hold the screw while you try to fit it into the hole. I spent about 10 minutes total fighting to get the stupid screws to tap. I finally gave up and drilled a much larger pilot hole than I wanted to.All of these things were what turned a 5 minute installation into a 30 minute exercise in frustration. But let me be VERY clear here...these failings were MY fault, not the product's. I was installing a custom-made drawer into an 11" opening of a 15 year old desk. Not the easiest of projects, but it works.Now to install a writing shelf on the other side (!!!).
juanky10
Reviewed in Canada on January 3, 2019
tres bon article
John H. Meyer
Reviewed in the United States on February 6, 2018
The bearing race in the old glides in my office desk center drawer broke after thirty years. I was not too upset because the old ones were not full extension, and it was a real pain to get to stuff in the back of my drawer.I like these a lot. They have a firm close so the drawer doesn't bounce back, slightly open. They are reasonably smooth, and are as smooth as the ones I replaced. That said, I have used drawer glides that were a little smoother, but cost five times what these cost, so I won't reduce the rating because of that.For the price, these are amazing.The quality of construction looks pretty good. My old glides used a piece of plastic for the bearing race, and that is what finally fatigued and broke. These have a proper metal race to hold the bearings.The instructions made the installation seem a little more complicated that it needed to be. Basically, all you do is fasten one part of the glide to the drawer, making sure it is evenly aligned with the bottom edges of the drawer, with the front butted up to the back of the door front. You then add the outside glides piece, stick the drawer into the cabinet or desk, and then make sure the glide is level, and the proper distance from the back.Speaking of level, I installed these in my desk, and the floor on which it stands is not quite level. Therefore, I had to install the glides to the same amount of "unlevelness" as the desk, in order the glides to be parallel to the various parts of the desk. No big deal, but it is something you might not think about.
Uklamen
Reviewed in Canada on April 20, 2018
Great price and excellent design. This worked perfect for my installation.I used this to mount my projector into a bulk head in my basement. Slides away smoothly and holds plenty of weight.
Glen Anderson
Reviewed in Canada on February 17, 2017
Good quality. Very sturdy.
Grandma
Reviewed in Canada on October 9, 2017
These are a very good product. I did not follow the instructions provided, but did it my own way, which worked great. I had to do this because of where I was installing them.These were about half the price that our local hardware store was asking.
Cathy
Reviewed in Canada on November 21, 2016
DOES come with screws, tucked into one of the end caps. Haven't mounted yet (it'll be foy my keyboard tray on a desk I'm building), but they are very strong, and glide smoothly.
Recommended Products
