Shopping Cart

Your cart is empty.

Your cart is empty.

UUQ Tactical Holographic Red/Green Reflex Scope Sight 4 Reticles W/ RED Laser ( 12 Month Warranty)

Free shipping on orders over $29.99

$43.19

$ 20 .87 $20.87

In Stock

About this item

  • Tubeless design with 33mm reflex lens aperture provides a wide field of view, suitable for rapid-firing or shooting of moving targets besides normal shooting.
  • Installed Multi-Reticle (4 patterns) in Green/Red illuminations with adjustable brightness control.
  • Integrated RED LASER sight, fully adjustable and independently controlled by rat tail switch.
  • Built-in rail mount for standard 22 mm / 0.8 inch Picatinny rail or weaver rail, no need to re-zero when remounting the dismounted sight.
  • Very light weight and 100% waterproof, fogproof and shockproof.Low power consumption for long battery life.



Product Description

HD103B banner
Best Value

HD103B small
Reflex sight specificaiton:

  • Object Aperture: 1.3 inches /33 mm
  • Field of View: 15.8m@100m
  • Weight: 0.68 lbs / 310 g
  • Housing Size: 3.2 x 2.6 inches / 82 x 66 mm
  • Battery: 1 x CR2032

Red Laser Specification:

  • Laser Class: 3R(IIIa)
  • Maximum Output Power: ≤ 5 mw
  • Laser Reaching Distance: 100m/328ft
  • Additional rat-tail switch
  • 3 x LR44 button cell

Tiny and Mighty

UUQ Reflex Sight (Red Dot Sight) is well designed and manufactured to offer a best value for money option for general shootings, including home defense, tactical uses, and hunting.

The tiny rifle optic actually can meet most of the common requirements, especially in scenarios with short-mid range targets, moving targets. The attached Laser Sight further speeds up target acquisition and decreases the time for follow-up shots.

Despite of some limitations, the Sight is a mighty one:

  • Big field of view
  • Both eye open
  • Unlimited eye relief
  • Corrected Parallax
  • Light-weight and durability
  • Additional laser sight

Laser Class: 3R(IIIa); Maximum Output Power: ≤ 5 mw

HD103B environment

Sight in guides

loosen locking screw

Turning the lock screw counter-clockwise one and a half turns with the Allen wrench included will loosen the screw and allow elevation and windage adjustments to be made.

HD103B Sight in

After the locking screw is loosened, turn the Elevation and Windage screws to zero the sight to the gun.

Tighten locking screw

Turning the locking screw clockwise until snug (not too tight) will lock the elevation and windage adjustment mechanism, holding sight zero.

HD103B Caution

In order not to damage the sight:

  • Do not turn either of the two adjustment screws when the locking screw is locked.
  • Do not turn the locking screw too tight.

Multiple application scenarios

HD103B on Rifle

Rifle

HD103B on pistol

Pistol

HD103B on Crossbow

Crossbow

HD103B on Paintball gun

Paintball gun


Stan P.
Reviewed in Canada on September 10, 2024
I use it on my Mossberg 500. Well made. They don’t tell you that the way to center the dot, are the 2 tiny set screws at the front of the red dot unit. I recommend his product.
D K
Reviewed in Canada on May 16, 2023
Product was dead on arrival.
Dave
Reviewed in the United States on November 13, 2023
The scope seems to be fine but according to instructions inside box, The scope comes with mounting rail and a rubber Dust plug. Both missing. Please provide those items and everything will be fine thank you.
CEP
Reviewed in the United States on August 3, 2021
Sturdy sight w/laser, worked so well I ordered a second. Only area of concern is the laser adjustments are not locked… That being said, w/100+ .223 rounds down range, both sight and laser are still sighted in.
George Browne
Reviewed in Canada on July 30, 2020
Great looking sight, appears well made. Sight is bright & clear, reticles are crisp and brightness adjustable. The sight is light but feels solid and doesn't add a noticeable imbalance to the weapon, making it just slightly heavier at the front. The laser is bright and easily visible in daylight, though it is far more effective at dusk or at night when low light levels render the holosight less effective, unless you also mount a tactical light on your weapon. Zero the holosight first, then zero the laser to the sight reticle.
F the WEF
Reviewed in Canada on May 15, 2020
I had originally posted a poor review which I now humbly revise. What I didn't realize is that you must first sight in the red dot itself, because the adjustments move the entire body of the sight. Then you can adjust the laser afterward. Derp, my mistake. Good brightness adjustments, cool reticle options, and a pretty fair price at the time.
Kevin Healer
Reviewed in Canada on December 11, 2019
Solid all metal build. Adjustments hold zero very well.Very poor quality control with regard to the switches. Plunger switch is stuck on, regardless of the switch position. The pressure switch doesn't work at all. Those are two pretty serious faults, but other than that, it seems ok. I have spare parts, so I won't bother returning it, but I wouldn't recommend buying this. With that kind of quality control, this should be a $15 sight.
B. Cole
Reviewed in Canada on August 14, 2018
This is a great sight for the money! I like the laser and reticle option and the laser also comes with a rat tail for easily switching the laser on or off.The sight is very easy to mount and sight in and has good construction. I mounted it on my new Crosman DPMS SBR and it works great and looks awesome.
Richard
Reviewed in Canada on May 23, 2018
Sight works well. Have two of them, one is mounted on a G&G Raider airsoft AEG and the other is on a Tavor Tar 21 AEG. I have used the sight several times already and it works well. The 4 reticle Open sight used to be my go-to red dot ... I have 3 of them. But one was broken by a BB and so I was looking for something else. I thought I'd try this one. Turns out it is sturdier, more compact, less prone to being shot, and easier to protect than the 4 reticle open sight I had previously been using. Also, the adjustments on this sight work better than those on the 4 reticle Open Sight. The red dot is weak but the green dot is bright enough even on a bright day. Manufacturer should increase the brightness of the red dot. The different reticle options are good to have. Adjustment screws work as they should. The laser works and is aligned well. The rat tail switch also works. Not sure when I’ll use the laser but it’s kinda cool.
Mike L.
Reviewed in the United States on March 20, 2018
UPDATE:I received a very prompt and concerned response from the seller, who felt I may have received an anomaly and is providing a replacement for me to try and further review. Once I receive it, I will try it out and further update this review.* * * * * * *I really wanted this to work but couldn't make it happen. It seems well built but does not hold up to light or ordinary use. I installed this to my 5.56 AR-15. It fit snugly and was a the right height for co-witness. Red and green dots were clear without too much bleeding at the highest setting. However, zeroing was complicated at best. It simply will not hold zero for very long. In addition, the plastic ring around the front of the glass popped out while at the range. Similarly trying to zero the laser was complicated, if for no other reason that the recoil would cause it to shut off and pushing the button off then on would not get it back. It would sometimes randomly appear, being kicked back on by the recoil. So this would probably be a cool accessory for airsoft, but did not manage well on a rifle.
Heather Goatcher
Reviewed in the United States on November 22, 2018
Good economical sight. Pros: nice appearance, good variable brightness adjusting of two red and green testicles. Includes additional red dot laser pen light on side. Laser tested to 50 yards well. And may have reached out to 500 yards.Cons: Laser red dot was not in line with the reticle but neither has been sighted in yet. I see where the reticle in the scope has adjustments for left/right and up/down. Same small Allen head screws are evident for sighting in the red dot laser.Only further testing and time will tell if the scope holds up to the recoil and concussion of the 12 gauge shotgun and the .44 magnum revolver I plan to use the scope on. The green and red reticle are fairly fuzzy and image is not crisp. Unfortunately I see some moisture or water vapor condensed inside the lens right at the center over the reticle. The unit was shipped when it was about 15 to 20 degrees F. I do hope time will dry up the moisture eventually.
OffRezWolf
Reviewed in Canada on November 30, 2017
Update: Once taken to the range and sighted in this sight is absolutely fantastic! So much so, that I bought a second one for an airsoft rifle. I highly recommend this as a solidly built, affordable and customizable scope for your needs.Great product but the airbags protecting the box the scope was in were both completely popped. I was worried the scope may be damaged but fortunately the packaging inside the scope box was very secure. I will need to make some adjustments though as the reticle is badly out of alignment. The image though is sharp, and the brightness adjustment is a very nice and easy to adjust.
Kyle Hendrickson
Reviewed in the United States on November 28, 2017
Feels like quality. Have not shot any rounds with it yet, but I'll update once I do so. I plan on attaching this to a Remington 870 12 guage.***UPDATE***I successfully attached the sight to my shotgun and shot about a couple dozen rounds through it. Works great! It was easy to zero the sight with a chamber laser bore. I haven't had to readjust or re-zero it or anything. I highly recommend using loctite blue 242 for the screws when mounting it to the picatinny rail, just in case.***UPDATE #2***After about 100 rounds of target loads today, my sight finally broke. I won't take away stars because it couldn't withstand my shotgun's recoil, simply because this sight is probably more intended for smaller calibers, like a .22Don't buy this sight if you intend to use it for a shotgun
Recommended Products