Your cart is empty.
Your cart is empty.Product Description
SURIEEN AC Oil and Dye Injector Kit with Snap Quick Coupler, for R410A R134A R22 R12 Refrigerant System
- Perfect suitable for Car Home Office AC and Car AC systems, it's a professional service tool.
- Using Aluminum alloy, with 1/4" female connector, make it compatible with most AC systems (if not, use CV23p for some 5/16" R410a systems).
- Once shot may cure and save a sickened compressor caused by low oil.
- Compatible with fluorescent dyes for leak monitoring, compatible with all oil types (POE, or mineral oil) Compatible with all refrigerant types.
Easy to install:
- This 2oz A/C have three parts: oil cylinder, check valve and R134A snap quick coupler.
- Check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube.
Specification:
- The Compressor Oil Injector of 2 oz Push-in type.1/4 oz-2oz / 7.5ml-60ml
- Connection: 1/4" SAE Female
- Material: Aluminum alloy body, and brass connector
- R134A Working Pressure: 3000 PSI
- Burst Pressure: 600 PSI
Please use caution:
- When injecting dye into a pressurized system, always wear safety glasses and glove!
- Never breathe refrigerant vapor!
- Never use the UV light without wearing the UV glasses!
- Lamp surface will get hot very quickly. Do Not Touch the Lens!
HOW TO USE:
- Before adding any additive to the injector, the shut off valve must be off. Unscrew the end off the injector.
- Put in the desired amount of additive.
- Screw the end back on the injector.
- Connect R134A R12 F22 coupler to the injector.
- Connect other end of the injector to the low side service port on the vehicle.
- Open the valve on the injector.
- With refrigerant attached, fill to proper pressure.
- When finished using the injector tool, clean well by using brake cleaner.
Thomas H. Nodine
Reviewed in the United States on August 6, 2024
Used this device to easily inject HVAC leak sealer into house A/C.
Joseph Rodgers
Reviewed in the United States on July 10, 2024
This product was just what I needed to diagnose and repair the auto A/C in my old truck. I was able to add the recommended amount of dye to the A/C system and pinpoint which component was leaking refrigerant. I ordered a replacement evaporator core and replaced that part of the system, rather than spending more money on the "shotgun" approach of replacing all the major components in the system to get it working properly again.
P. M. Porzi
Reviewed in the United Kingdom on June 26, 2023
as good as dwscription. great product
AL
Reviewed in the United Kingdom on June 10, 2023
Dont bother with cheap plastic versions this is by far the best. Easy to use no leaks, good solid construction. Quick delivery.
Gerry Gosselin
Reviewed in Canada on July 18, 2022
unfortunately, did not screw onto the brand of AC refrigerant i was using
todd brennan
Reviewed in Canada on May 31, 2021
Works well holds a good amount
Alexander Martínez
Reviewed in the United States on March 18, 2020
Is a good product, easy to use and made in resistant material.
Erin Brownlee
Reviewed in Canada on April 28, 2020
Great little tool, loaded the oil with ease !
Customer
Reviewed in Canada on August 25, 2019
Worked as intended once i figured out how to put oil in it the cap was on super tight
gaudrtyl
Reviewed in Canada on August 15, 2019
Does the job but the orings look cheap and not fitting as tightly as my snap on unit
Recommended Products