Your cart is empty.
Your cart is empty.Amazon.ca Product Description
The 3-Gang Recessed Low Voltage Cables Plate is used to install low voltage cables behind your wall mounted display, amplifier, or other audio and video devices. These plates are designed to be used with a standard low voltage mounting bracket made by any major manufacturer. The cable plate can be installed with the opening facing up or down.
From the Manufacturer
Vehicle specific camera for honda accord 2011, waterproof (ip67), 170 -Degree wide viewing angle, cmos, ov7950, ntsc, effective pixels: 510x492, minimum illumination: 0.2 lux at f1.2, power dc12v.
Kevin
Reviewed in Canada on September 5, 2020
Good product. Priced very high on Amazon, but I chose to pay the high price anyways as I had a hard time finding stock locally at the time.
Dalton
Reviewed in the United States on May 27, 2020
I just bought a house that has been completely wired with RJ45 cable but the previous owner did not have it neatly organized when I moved in. Instead of having any kind of wall plate, they had an uneven cutout in the drywall. There were 30 cat 5e cables that I needed to pass through whatever wall panel I decided to go with. In the end, I decided that a 3 gang box was the way to go. It may be a little bigger than I needed, but I wouldn't have changed my decision to go with anything smaller. This wallplate does not come with a wall bracket, so if you need one of those I would recommend going with the "Legrand - On-Q AC101003 3Gang Low Voltage Bracket, Retrofit" here on Amazon. A little pricey for a piece of plastic, but overall it's worth it to have a clean home network setup.
Butch Bailey
Reviewed in Canada on June 20, 2019
3 gang combination takes the place of 2 double gang for better look
Robert
Reviewed in Canada on May 9, 2019
used for entertainment system hookup
Truck guy
Reviewed in Canada on May 15, 2019
As described
Gord
Reviewed in Canada on December 12, 2019
Great productBut they should provide a template for installation purposes!If that was included I would rate them 5 star !
Ikbal
Reviewed in Canada on January 16, 2019
It is very easy to install it.
Arturo Castellanos
Reviewed in Mexico on August 17, 2018
Por fin pude ocultar los cables de la televisión por la pared.
NADEAU
Reviewed in Canada on May 31, 2018
Merci
John Mowchan
Reviewed in the United States on October 2, 2018
Ok, I have updated my review because I can't read. I bought this 3-Gang Recessed Low Voltage Cable Plate based on the pictures that detailed a base plate from which the outer plate would be attached. After the kind and highly professional response from DataComm and re-looking the ad on Amazon, I see the error of my ways. Lesson learned is that you have to read everything in the listing.With that, the quality of this product is very good. As a work around, rather than using the base plate, I made the hole in the drywall smaller so it would fit snugly. I then used a few small white drywall screws and it holds great.
Customer
Reviewed in Canada on February 4, 2016
I was using the 2 gang version of this to run wires out from my home theater rack to the back room to run the wires between shelves. Needed the 3-gang version as I had too many wires going through and it works perfectly.
Keith Corbin
Reviewed in the United States on January 3, 2012
This worked great for running AV to my flat screen wall mounted TV. I liked the 3-gang a little better than a 2 as I was able to open a bigger hole to see what was going on in the wall. I mounted my TV over a direct vent fireplace and this three gang allowed me to make sure I was strapped to a stud and greater than 2 feet in all directions from the fireplace. Overall it worked great. I was able to get my arm in the wall and move around much better than a 2-gang would have let me.For those that were talking about how to mount this to the wall, I think people don't realize that you should be using a mounting bracket with these. These are intended to go over a 3-gang box or low voltage mounting plate. If you don't have one, I picked up one and it mounted right to the drywall with ease and you don't have to worry about pulling it out. The reason it comes with the "flat screws like a light switch" as one reviewer put it is because it's designed to be installed like a light switch, NOT directly into drywall.If you need a low voltage mounting bracket: I also uploaded a few pics if you need clarification.The only downside to be aware of is this does open up a large hole in the wall. Make sure you aren't creating a huge draft situation. I used a little cotton insulation (I would advise against fiberglass since it's exposed) and it stopped the draft. If you're worried, light a match and blow it out right in front of the plate, if the smoke goes straight up, you're good.
Agent1410
Reviewed in the United States on July 3, 2011
The plate did exactly what I needed it to do. The design on the on the other hand could be re-designed. The holes where the screws attach the plate to the wall are placed too close to where you will have to make cuts in your drywall. I thought that I was being very careful while cutting the hole in the wall and still ended up only being able to attach 3 of the screws. Take your time cutting the drywall and you should be all set. Looks great in the wall.
Recommended Products
