Your cart is empty.
Your cart is empty.Jeff White
Reviewed in Canada on April 25, 2025
They fit my Gladiator perfectly the instructions could be better
Patrick Beaulieu
Reviewed in Canada on September 20, 2023
De très bonne qualité très facile assembler un coup tu n’a un d’installer parce que les explications sont très vagues les plans sont incompréhensibles il manque des étapes de montage mais très satisfait du produit
Customer
Reviewed in Canada on July 11, 2023
Fit our 2023 Gladiator and help with getting or out.Only bad thing, if you are really picky, is there is a gap about 1/2 inch where you can see the bolts. Top of bolts visible where it bolts on the pinch seem.. It doesn't bother me - if it did, I would just paint them.It take a long time to arrive, even with Prime Membership.Overall I am pleased.
Keith A.
Reviewed in the United States on June 22, 2023
These are decent for the price. Very simple and clean look. All hardware was in the box. Took me around 2 hours taking my time. Make sure the 2 support brackets are straight and the inside one is hanging straight and not cocked. I pushed up on the steps before tightening so they were tighter to the top. I stepped on them and bounced up and down and they didnt move. Really wish they took advantage of 4 mounts instead of 3 but it seems solid. Overall I am happy with these.
Mark L. Holliday
Reviewed in the United States on May 23, 2023
As described look nice.
Jocelyn
Reviewed in Canada on April 18, 2023
Got them for my 2022 Jeep Gladiator Rubicon and they fits good but it would be better if they would come with 4 bracket instead of only 3 !
S. Joseph
Reviewed in the United States on June 23, 2022
Great looking, clean lines (and welds)I really like the style with the clean angles and smooth lines. I would prefer the step platforms to be a tad wider - but then again, I like that it is minimal weight yet strong. I (as another reviewer mentioned) was concerned that there were 'only' 3 mounts, so I contacted the seller and they assured me this was as designed (advertised as 500 lbs). I haven't tested that with a 1/4 ton static load, but I can say that there is no appreciable flex when stepping up on it with my full weight and then some (200 lbs).Light weight (and rust proof) yet strongOur gladiator is flat towed behind a motorhome, so minimizing weight gain is important. The aluminum construction is key to weigh savings, with the added benefit of no rust through. Note that the brackets are power coated (thick) steel for strength. The aluminum gauge seems thick and so far has taken on no dents or dings. These are rock sliders, so I can't be sad if the bottoms get scraped, but if that does happen, I can be comforted in not worrying about rust through.Installation simple once you understand the instructionsThe instructions are sufficient for a smooth installation, but you have to spend some time examining them to understand the steps. (Read twice, install once!) Most of the work can be done alone, but a having a second person for about 5 minutes on each side helps a lot. 40 minutes to do one side, and 25 minutes for the other. Plus at least 15 minutes to study the diagram-schematics and instructions. (There was one error in the instructions where it called for a nylon lock nut but the kit uses a lock washer and nut. I reported that and was informed that would be corrected in future versions.) All of the parts needed are included, but there are no extra parts, so don't loose any washers, nuts, etc. Also, the parts are similar sizes (M6 and M8), so look closely as they can be accidently interchanged.All said, I am very happy with the result.UPDATE AFTER A YEAR: I stand by my original comments, except for using the words 'rock sliders'. I've since done some pretty aggressive offroad trails with rock gardens. As expected, I did scrape up the bottom in my first outing, and no rust or perforations followed. On my third ride over rocks with contact, I really mangled the bars up rather severely - and ended up replacing these for steel tube alternatives. I was pleased that even though these were pinch-weld and body mounted, they did a great job of protecting the body. Effectively, this 'side armor' did it's job and sacrificed itself to protect the body.My lesson was that these are nice looking steps and will offer some moderate protection, however, do not expect these to survive multiple aggressive rock garden trails. I would still recommend these for most drivers that want a step and the look, but I caution that if you plan to beat them up, look for something in heavier gauge steel.
Howard
Reviewed in the United States on January 18, 2021
Really disappointed! My mechanic, whom I’ve used for 30 years, and I spent 3 hours trying to install these. Once we eventually got the 3 brackets installed on the first side and attempted to attach the board itself, there was an 18” gap from the end of the board to the mud flap on both sides. 36” too short! I thought I received incorrect boards since the part number in the description was different than the part number on the box, which is why we were having so much trouble, but I was informed by automax styling that they were the correct items shipped. Definitely do not recommend for Jeep Gladiators as they are way too short. I’ve returned them for a full refund as the photos show it extending the entire length. Very misleading...
Emmanuel
Reviewed in Canada on April 16, 2021
Bought this as my wife & kids had a hard time getting into the gladiator with factory rails. They do the job, and you don't really lose ground clearance since the frame is still lower than the steps.Install was OK, but the bolts should have been welded to the steps, I don't like this install system; seems cheap to me. Also; you can clearly see the pinch-weld on the truck which is annoying(OEM rails hides that). I will have to paint them black.
Ronnie
Reviewed in the United States on July 30, 2020
The rails are very well built. Welds are nice and uniform. Coating is Generous. Has a flat black light texture to it. Follows body lines very well. Whole rail is assembled and braced with obvious thought.Installation took me about 2 hours by myself. Did one side carefully in about 1.2 hours and the other was a snap. Instructions were not stellar and also to note it was late and dark outside when I actually got to 2nd side. If instructions were better pictured or video linked I believe install can be done in hour.Brackets in all were 6 main and 6 supporting...so 3 main and 3 supporting each side. Which on the Gladiator your left with a empty spot on each side for another center support. I didn't like this. I feel the 4th supporting spot should be used and hope the company sees this and adds it. I will takes pics of this when time allows. But this is why the 4 stars and not 5.My best advice also for buyers is to set aside 2 hours daylight. Separate and count your hardware ...bolts ...nuts...screws and so on.I was either short or missing 12 large washers ...or 6 a side for horizontal supporting brackets. Luckily I have extra here. I suppose if you do a initial count you will see this. Instead of waiting and asking for replacement I went ahead with install.Also shipping and packing was timely. Package came in about a week or so. Was packaged very well.
Recommended Products