Your cart is empty.
Your cart is empty.Tap threads up to 14x faster! Our SpeedTaps are highly durable and are designed for use with an impact wrench for optimal speed! Hand tapping is a slow and tedious process that has remained unchanged for years. SpeedTaps drive end is designed to match bolt sizing and utilize all the advantages of common sockets and wrenches — SpeedTaps is sure to speed up your processes. SpeedTaps work faster and last longer than traditional hand taps due to the engineered advantages. Tests on mild steel indicate tapping 100 holes or more while maintaining the same high quality thread. Workers enjoy using SpeedTaps because of it’s easy start geometry and being able to use the same wrench or socket to do up the bolts. SpeedTaps is the most versatile option for the non-skilled worker allowing for further cost savings, or allowing the professional to increase productivity. SpeedTaps easily outperforms in tight spaces that would be too close for working with traditional tap wrenches giving users an advantage over old technology.
David buck
Reviewed in Canada on April 1, 2025
Good luck getting the right one if it even arrives had nothing but a hassle dealing with this item to bad there a good tool taking my business elsewhere
Alexandre
Reviewed in Canada on March 4, 2020
Very happy with the product and customer service provided by Val!All I could suggest is to take your time when using these tools. They work great but always keep in mind that they are not invincible, just like any taps. Use plenty of oil (Tap Magic fluid for example).I had to tap 53 holes that were 5/16'' in diameter in a 3/8'' thick steel plate. I did break some taps at the beginning and that was frustrating but that was my fault (power tool setting set too high).Although these are tools that are meant to go faster, don't make the mistake like I did to overestimate them! A couple in and outs helped a lot when cutting threads. Always keep the alignment with your impact driver and if it starts to jam, don't push harder, back up a little to eliminate the chips and go again.Overall, very happy with these taps, it takes time to get used to them on thicker and harder materials but it will save you hours.If you happen to break a tap and need to remove it, don't try to hammer it as this won't do much. Drill it with a carbide bit or try using a tap extractor if you have one, although if it broke it usually means that it's in there for good!!
Dave Hewitt
Reviewed in Canada on April 18, 2019
TWO THUMBS UP!!I use these taps professionally. I have a set in standard and metric. I can't even count how much time they save both in fabricating and repair! As soon as our welder/fabricator saw one in action, he bought both sets too!
Customer
Reviewed in Canada on August 15, 2018
Wonderfully made tool. Great customer service.
Recommended Products
