Your cart is empty.
Your cart is empty.
Specification:
Name: Soil Tester
Size: about 25.5*5.5*3.5cm/10.04*2.17*1.38in
Weight: about 102g
Packing List:
1*Soil Tester
Note:
Instructions:
1.When measuring the pH and humidity of the soil, first insert the probe into the soil as as possible, leaving about 1 cm above the ground.
2.Press the button the to MOIST, which is the moisture button, and the corresponding table is MOIST. DRY means dry, and WET means wet. The value 1-3 (red part) indicates that water is needed; 4-7 (green part) means that it is appropriate; 8-10 (the blue part) means it is too wet. Please adjust the watering time according to the species of the plant.
3.Press the button the to PH, which is the pH key, the corresponding table is 8-3.5. ALKALINE means alkali, and ACDIC means acid. The value 7 is basically neutral. the smaller number , the greater acidity. Please refer to the plant to adjust the pH of the soil.
4.The LIGHT key is the illuminance, the measurement range is 0-2000 lumens, the larger the value, the stronger the light, please decide whether you need shade or not according to the species of the plant.
5.When using, pay attention not to touch the stone when inserting the electrode, and do not use with force, or it will easily damage the electrode. Please wash the electrode after use.
Others:
1.Due to the lighting effects and shooting angles, there is color difference in the product, please understand.
2.Due to manual measurement, there is a tolerance in the product size.
