Your cart is empty.
Your cart is empty.Amazon.ca Product Description
Chamber the Sightmark Laser Boresight in your 7mm, .338 or .264 rifle like a regular cartridge, and a red laser dot shows exactly where you're aiming. Ideal for hunters, competitive shooters and LE, this device significantly reduces wasted cartridges and shells. Simply adjust your sights or scope, and save your extra ammo for the hunt. Includes a carrying case, three (3) AG3 batteries, and instructions.
From the Manufacturer
The sightmark laser boresight provides the most convenient and accurate method for sighting in rifles and shotguns of all types. Simply chamber the boresight like a regular bullet and a laser dot will show exactly where the rifle is aiming. Iteasy to sight in any scope without firing a single shot. Live fire is only needed to fine tune the weapon being sighted in order to compensate for inconsistencies, such as bullet drop due to distance. Perfect for hunters, competitive shooters and law enforcement, the sightmark laser boresight is sure to take the frustration out of sighting in almost any gun. Iteasy to use and will quickly save both time and money by avoiding prolonged live fire tests at the range; use the extra ammo for honing those shooting skills and for the hunt. A lightweight carrying pouch protects the laser for convenient use in the field. The sightmark laser boresight is available in several calibers and gages for use with all the most popular rifles and shotguns. Sightmark-make your mark.
Sleeper
Reviewed in Canada on June 7, 2025
Fonctionne bien mais en pleine journée dehors difficile a voir au loin
Utilisateur
Reviewed in France on February 24, 2025
Génial pour effectuer un réglage lunettes ou pour avoir une idée de comment bien viser avec une bande de battueLe prix de 50 eur est élevé mais la cartouche est vraiment bien précise (nous l’avons testé également sur cible en stand de tir à 25 et 50 mètres)
Paul
Reviewed in Canada on January 26, 2025
So my biggest issue with boresights is that if I rotate them the laser could draw a circle on the reference point. This one cant because if I rotate it the reflection off the rifling just causes trippy patters on my reference point like some strange kaleidoscope.Looking straight down this laser boresight I can see that the laser module is just ever so slightly off to the side and not correctly aligned, this could be an error on the quality control side but I have always been a bit leery of this type of boresight, so I can't say I am too surprised
Sehnrather
Reviewed in Germany on September 22, 2024
Gutes Hilfsmittel beim Ermitteln des Haltepunktes. Funktiniert nur bei Dunkelheit.
Francois
Reviewed in Canada on August 14, 2024
Facile utilisation super boresighter
HRC
Reviewed in Canada on February 12, 2024
My 300 WM will not cycle cheap ammo. This sight bore cycles like a precision round.
Aniello
Reviewed in Italy on October 4, 2023
Utilissimo. Funziona benissimo
Brett
Reviewed in Canada on October 1, 2023
Not MOA accurate, neither are most 7.62x39 rifles you'd be shooting it out if either. Will get you on paper at 100. Should get you within 10 inches of your aiming point. Beats not even finding the backboard with a new scope. You might only use it a couple times, but share it with a friend on the fange if you see them struggling.
alain veilhon
Reviewed in France on September 24, 2022
Confirmation de réglages lunette
Alain
Reviewed in France on December 7, 2022
Je ne conseille pas ce produit. Le laser fonctionne correctement mais n'est plus visible au delà de 10 à 12 m. La douille est mal calibrée et a tendance à rentrer dans le canon de ma Maral 30*06. Beaucoup de difficultés pour la dé chambrer.
Trista Garnett
Reviewed in Canada on November 8, 2020
This was perfect for setting my gun. Won't miss nothing this hunting season. The product was exactly as described in the item description. I live in Canada and the parcel arrived at my door in less than a week. I find that to be decent shipping speed. I would recommend this product to my friends and family. I would definitely buy again!
Customer
Reviewed in Canada on April 11, 2018
This is very bright. It surprised me. All of these brands would benefit from an on/off switch at the back of the unit, but it doesn’t take away from the functionality at all. Nice little carry case for it. I removed the batteries and placed them into a very small ziplock bag and then put them into the ‘pocket’ within the nice case.
Old Barnacle
Reviewed in Canada on January 16, 2017
This bore site works but it has some limitations.I have three SKS rifles and enjoy shooting them. Like all SKS models there is the problem of keeping a scope on zero with the way it mounts. If you've gone through the effort to put a scope one of these things you'll understand what I mean, if not it will be difficult to explain without writing an essay. I'll just leave it that to get a scope on an SKS means you become adept at using a file. This is a nice low cost option vs. a full blown multi calibre bore site kit and since we have three of the rifles it was worth it. Obviously it works fine for setting the iron sites.So every time we head out to pop a few of the kids talking toys (you know, those obnoxious things that jabber on for hours and you can’t wait for the kids to outgrow them so they can become targets and you get sweet revenge) the rifles can stand a quick check to make sure the scopes are still true. The easiest way to do this without wasting amo is the bore site.This little guy simply slips into the chamber and shoots the laser down the barrel. Once you have the dot on target it’s easy to dial in the scope. It works.There are some issues though:~There is no power switch, you have to unscrew the back cap to remove the batteries to power them it off~At 25 yards in broad daylight the dot isn’t really visible, even with new batteries, this is best done early morning or late eveningsThere are alignment set screws for truing up the laser which is a good thing but to properly align one of these things without the use of a jig can drive someone to drinking, slipping the thing in and out of the chamber while making minute tweaks to the screws. It’s a good thing that they have Locktite on them from the factory and in this regard, we’ve fortunately not had any issues with this particular device.It’s not the most rugged thing so we keep it packed in some cotton to ensure that if it does get any bumps they won’t affect its accuracy.
Recommended Products
