Your cart is empty.
Your cart is empty.Lykus HC-4410 Waterproof Hard Case with Customizable Foam Insert, Interior Size 17.32x11.42x4.72 in, Suitable for Pistol, Laptop, Small Drone, Camcorder, Action Camera, and More
Jayson Levine
Reviewed in the United States on February 2, 2025
I have a pair of Baofeng UV-5G Plus two-way radios and a pair of Tidradio TD-H3 two-way radios, and I wanted a means to store them together and in protected fashion. This case is perfectly protective and durable - perfect for the job. The Baofeng comes with two 15½" flexible antennas, which I didn't want to store curled up. The top cavity that I created for them actually holds all the antennas I'd need for both radios. The case handily holds both pairs of radios, the batteries, the charging cradles for the Tidradio (the Baofeng didn't come with them), and accessories. The only things I wasn't able to get in there were the USB-C chargers, but I'm not even convinced I need them, considering how many other USB-C chargers I have around the house. Perhaps if I was more creative with the cavities I plucked out, I might have been able to get those in, but that's on me, not on the manufacturer. There is foam padding in the lid as well as below the pick-and-pluck foam (there are two layers of that). Overall, I couldn't be happier.
José Antonio
Reviewed in Mexico on January 5, 2025
Buen producto
Customer
Reviewed in Canada on April 9, 2025
This case is by far the best deal available! Don’t let the low price fool you, it is quality!
Jacobo Guzman
Reviewed in Mexico on July 9, 2024
Sería ideal que tuviera cerradura, pero es un producto muy recomendable
Aaron Hartwig
Reviewed in Australia on December 6, 2024
I use this constantly when flying for work, packed in my check in luggage bag.Hold all my tools such as fibre testers and copper tester.Has been through many abuse and has stood the test.I have not dropped it yet, but would think that it would do some minor damage to the external of the case although it does have quite a bit of weight in it. However the contents would remain unharmed - which is what I want from this.
Jazzy
Reviewed in Canada on December 5, 2024
This is VERY sturdy. Great case. Husband Loves it! Great for the work truck to protect his laptop from damages.
tyler
Reviewed in Australia on December 30, 2024
used for a laptop case, popped out the memory foam and fits in perfectly no issues.
GETB3NT
Reviewed in Canada on November 24, 2024
I bought this because my Fluke multimeter kit was becoming too much for the factory box. All this stuff cost me a fortune, so I needed something better. This box is waterproof, a decent size, was easy to make correct size spaces for my stuff, and the easy open latches work perfectly. If there's any such thing as a high end box to protect your electrical testing tools, I guess this would be it. A tough box.
Zachary Iles
Reviewed in Canada on July 8, 2023
Fantastic product. I just wish I knew this model existed so I could stop buying the pre-cut ones for specific products - I much prefer the customization. I bought this to organize all my lightweight "street" gear for videography. I purchased the HC-4410 and was able to fit: DJI Action 3, Insta360 Go, DJI Mic, Insta360 RS 1"inch 360, NDP filters, cables, all attachments for the products, SD cards, and a USB C fast charger with spare cables. Everything fit neatly with two squares between and each in it's own hole.Pros- Materials are /A-. Definitely good enough for me- Tested waterproof by putting a weight in it and leaving in tub overnight. Completely dry in the morning, even shook it hard underwater- Included is two layers of different height foam, which give you a lot of flexibility in controlling how deep an item goes- The squares are strong enough that it'll take you a bit to get the hang of ripping them out, but not soft enough that when you pull a square it accidentally rips off the one behind it too- It is very satisfying planning it out and plucking them, almost like you're creating art- It's nice they have this customizable one and I see zero reason to buy the precut ones. Previously I purchased a precut one for the Mavic 3 that I wish I made myself- Squares don't go completely to the end, and there is a strong liner wrapping around the edgeCons- Not many. My only advice is to leave a minimum of 2 squares between holes, be conservative. I had one hole collapse because I got greedy trying to make individual slots for ND filters with 1 square a part and collapsed the hole next to it. Was able to recover by just making one giant hole for all the filters
Eric B
Reviewed in Canada on May 8, 2023
I wanted to use this case as a foundation for my DIY camera/laptop tether. This works great; in the end, I did end up using a different foam inside. Although the foam included in this was as good as other pull-and-pluck foam, I have seen.I did like how this gives you two layers of foam instead of one, should you prefer it.The best part IMO is the push button locking latches. I have paid $50 for similar-style latches to replace some of my Pelican air cases.In the end, I’m tired of spending hundreds on name-brand hardshell cases. In this case, I wanted something quality but not too expensive since I was playing around with it. I am glad I choose this case. I couldn't risk buying a new pelican and drilling holes in it.For reference, I use it for my 14” Macbook Pro M1, and it had enough space on the sides for the attachment I wanted to use. It wasn't too high in dimension but high enough that I could install a hub and hard drive below the foam. Once I was happy with it, I measured the lid size and added a -A-Mode lid organizer for a pelican case. All the junk you see I needed and added, but I used these images so you can see size and texture.The grip on the handle feels great when carrying this case as well.I hope this helps! Enjoy
Mr. Andy
Reviewed in Canada on October 26, 2022
4 stars only because the foam in the lid is 3/8-1/2" to skinny, otherwise it would be a 5. 3 pieces of foam in bottom, a 3/8" solid foam at the bottom, a 1.5" pick-foam and then a 1" pick foam at the top. the laptop fit perfect in the top layer and the charger and other stuff fit nicely in the bottom, 1.5", layer. I just need to source a piece of foam for the lid that makes it all fit nice and tight.
S. Saber
Reviewed in Canada on November 3, 2021
After debating boxes for safe storage of my laptop while Overlanding, I settled on this box for the sake of the size of it. Overall it's met my expectations! The exterior is robust and the foam inside can be torn to fit whatever is needed, complete with a handy video on how to do it.I set it up and went out for a test-drive with it in the trunk and everything went super smooth. Good product for the cost.
sthistle
Reviewed in Canada on November 19, 2021
This was an excellent purchase. I have been getting leery of ordering from Amazon lately, but this product renewed my interest. Very solid construction. For those wondering about tracing out the area to pick, I simply aligned where I wanted something to go and picked probably a 2 piece smaller area. Then I would slowly expand it if needed. I recommend having any items snug. The foam will allow you to squeeze in a slightly larger item than the area picked.
Recommended Products
