Bulb worked fine

These bulbs are great, but they do not last long. I’m on my third set and with the auto turn on function of your head lights on modern cars today, they last for a little under a year before they burn out. For 2x the price, I can get the Phillips bulbs from Walmart that last for 5 years. The color just is not as good as these lights, and the amount of light these throw down the road is much better! Only giving them 4 stars because they do not last as long as they should.

Recomendable

Cheap and lasts a while

Fits my 2018 kia forte. I've purchased twice 👍🏻

My car is going on 22 years old, so I've replaced this more than once when the low beams go out (different bulb for high beam). Probably should polish up the plastic in the headlight, though I live in the sunbelt, and these fog up again after awhile (wish they still used sealed beams, the sun didn't degrade the glass and you got whole new unit for much less expense and lower maintenance). Probably should replace the headlight reflector unit and plastic, not just because of the fogged plastic, but also mine has some sort of built in city light unit but the insulation on the wiring has deteriorated and threatens to short out even if the wiring to the low and high beam bulbs itself is fine (wires are inside the headlight unit...probably should just cut the wire, since they're not required to pass inspection, and don't really do much besides look unique....kind of like the light bar on my Dad's 80's Mercury Sable but for a European car.Anyhow, assuming you can get to the back of the unit to open it up (one side is easy on my car, the other side have to move the battery since it is in the way until you've replaced the bulb...might be good to just replace both high and low beams on that side while you're doing it even if one bulb still works). Bulb is keyed so it is oriented by the unit it goes into, there's a wire clip that I always forget how it works between changes since usually several years go by between replacements. Of course, try to keep the protective cover on the bulb and don't touch it with your hands, else you should wipe it down with alcohol to remove any oil that gets on the bulb (handle it by the stem and try not to touch the glass portion when putting it in place).Probably shouldn't wait until my state inspection to check, but sometimes it is oddly hard to know bulb is burned out on one side unless you leave lights on and get out of the car to check...on my car you have to have keys in ignition, otherwise the headlights don't come on, so don't scare yourself if none of your lights come on with switch in on position but the keys not in the right position in the cylinder. Another hint, I live in the sunbelt and state inspections are during the day, originally I think I had a buzzer that came on if the lights were on with the keys out of the ignition, but doesn't work anymore, so make sure to check to make sure your lights are turned off during the day after the inspection is complete, or you risk having a depleted or even dead battery due to lights being on and you not noticing since it is so bright out.....caught me 2 years in a row at inspection time where they guy didn't turn my lights off after checking that they worked OK, and I couldn't tell (parked outside in the sun so didn't know they were on) and drained the battery....even if headlight is off, other lights still on if switch isn't turned off (my car has manual light control, no photoelectric sensor to automatically turn them on/off on top of the dashboard).Replaced with the original halogen bulb...LEDs are popular now and I'm sure use less energy, guess I'm traditionalist but try to keep original type of parts when replacing them...maybe lighting doesn't matter as much, but sometimes there's a reason the OEM part was spec'd, found out in my profession that one guy usually isn't aware enough to second guess the original intent of the designer if they specify part for some reason you might not be aware of....I respect their time doing the engineering, and hope they do the same if they buy the end product I work on (nothing vehicle related)....probably more important for filters and such, but keep that philosophy even with parts that aren't that sensitive to options

Super easy to install, watch YouTube videos!

WORKS PERFECT

Work great for the price

It's only 12v so it's not the brightest bulb in the bunch but not the dullest, either. It's basically the middle child of light bulbs.

Perfect match for BMW 535xi 2011

Easy install, so far as bright as OEM part. Haven't used it for long, yet, hopefully will last!

perfect fit with 08 Mazda 3 Hatchback