Your cart is empty.
Your cart is empty. Material: Plastic+ Copper
Connection: Quick-plug type
Flow:0.03~0.08L/Min
Spray Diameter:5~60CM
Working Pressure: 2-12Bar
Atomizing kit includes:
82FT Atomizing tube
1/2 inch Universal connection*1pcs
8mm Pneumatic Tee*15pcs
360 degree adjustable copper sprayer*15Pcs
Pneumatic plug*2Pcs
Y type water distributor*1 pcs
bundle of side straps*1pcs
Pipe cutter*1 pcs
Tape *1pcs
Note:
1.Enough flow, enough water pressure can have better irrigation effect.
2.Working pressure is 2Bar~12Bar, spraying radius is determined according to the pressure of the pipeline.
3.If the leak happen,Is may because your faucet surface smooth.Please can wrap the Tape around the mouth of faucet before install connector.
Brett Edgington
Reviewed in Australia on March 1, 2025
Back of fittings leak and spray badly. There is no way to tighten or repair this section. Otherwise easy to install but bought it to repair old leaking system that sprayed on the path and this one does as well from new from the back of the fitting.
Arteagajg
Reviewed in the United States on February 17, 2025
The media could not be loaded.
CrankinSteve
Reviewed in the United States on April 22, 2025
Every one of the atomizer tubes leaked at the point where the brass nozzle slides into the blue receptacle on the end. Very disappointing. I just ordered some compatible ones from another manufacturer hoping for a better result. Also, the faucet attachment is not GHT, so you'll need an adapter to use it. I ended up using an Orbit product for that point and building a special hose and clamp method to attach it. The tubing is fine and the three way push-in points work well. The tube cutter made things easy as did the end plug. But, this is still a project in progress. I would never order this again due to the terrible construction of the atomizers and how the brass attached to the plastic. Very poor engineering. I did not send this back as I have decided to invest in alternative atomizers with a compatible tubing size. They will arrive later today and I hope they will be better. It is rare that I have to write a review like this one, but either I got a very bad batch or nobody else comes forward with a factual experience.
Ryan White
Reviewed in the United States on April 21, 2025
Super easy install, works great!
Perullo
Reviewed in the United States on March 24, 2024
I think this will be a keeper. But first - note that if you live in the US you will probably need an adapter to get the convenient adapter they included for hose use to conveniently work with your actual hose. It seems to be an "NPT thread" but our hosts are "GHT". The part linked below worked great for me.Second, at least one of the sprinker heads is leaking backwards out of the housing, and we've only activated 5 of them so far. That said, I found some sprinker heads from other listings that seem to work (same 0.31" OD) so I think it's fine to have to add some on. The hose is surprisingly easy to cut with the included cutter, including teflon tape was a nice touch, and in general the hose adapters seem to hold up well and not leak.https://www.amazon.com/dp/B08FSMYWZ3?psc=1&ref=ppx_yo2ov_dt_b_product_details
Recommended Products
$130.63
$ 51 .83 $51.83