Your cart is empty.
Your cart is empty. One of the rare USB to serial adapter which works with the very difficult ESP8266. It has a red power LED and one LED per com channel (Rx/Tx). You can see the activity which goes through. Very useful. The Jumper allows to select the output level 5V or 3.3V which is also very useful.
Specifications:
Working voltage: 3.3V/5V
Pin Definition(With the USB port facing to the right): DTR,RX,TX,VCC,CTS,GND
RXD/TXD transceiver communication indicator
USB power has over current protection, using 500MA self-restore fuse
Pitch:2.54mm
Please download the driver and files at link:
Please dl the file from links: http://www.ftdichip.com/FTDrivers.htm
Package included:
1* USB to TTL Serial Adapter Module
Features:
A very important complement for arduino.Easy to use, no chance of it breaking, allows for easy debugging of the arduino sketch.
Everything you need from a USB to UART board. Had zero trouble using this adapter to program your CC3D board with CleanFlight.
If you know how to make it work - nothing better than this.
Note: I would highly recommend turning off windows update and downloading the earlier version drivers that will surely not brick your device. If you've already bricked the adapter, these are the instruction:
unbrick: https://www.youtube.com/watch?v=RZH_qGautqM
unbrick: http://www.minipwner.com/index.php/unbrickftdi000(requires a Debian based Linux)
manual driver install: https://www.youtube.com/watch?v=SPdSKT6KdF8
Note: You need to use an external power source for the ESP-12 because standard USB doesn't put out enough current and you'll have problems programming it
