Your cart is empty.
Your cart is empty. S-Pixie Kit is a small and exquisite working mode is CW. Transmitting local oscillator frequency: 7023KHz; receiving local oscillator frequency: about 7023-7026KHz.
Station Power Supply Voltage is 9-13.8V (Battery or Linear Regulated Power Supply is Recommended), and the positive and Negative Poles are Not distinguished. AT: 50 ohm, 7MHz, standing wave ratio below 2.0.
receiving static current: 20mA, transmitting current: 120mA , Transmitting power: 1.2W, does not support automatic transmission, key: manual key.
Before powering on the station, please connect a dummy load to prevent accidental emission from burning.
Power supply: 9~13.8V Volts DC, >500mA (Recommend the use of batteries)
AT: 50ohm,7MHz,SWR Receive: static current 20mA
Transmission power: 1.2W
Frequency: launch the vibration frequency,7023 KHZ
Receives the local oscillator frequency: about 7023-7023 KHZ
Work mode: CW
KEY: Manual
Case: Acry
Product considerations:
1. Welding, assembling and debugging of spare parts require a certain electronic technology foundation, and will recognize the device and solder, and basically do not need to be debugged, as long as carefully assembled according to the kit instructions.
2. The factors that affect the communication distance are: AT and erection, whether the weather is good or bad, whether there is electromagnetic interference in the surrounding environment, and personal operation level.
3. This kit is basically free of debugging.
4. This kit works in CW mode (similar to the previous ), no intercom.
5. After payment, please contact customer service for instructions and related materials.
Package :
S-Pixie HAM DIY Kits
