Shopping Cart

Your cart is empty.

Your cart is empty.

Compatible with Chevrolet 3 pcs Carbon Fiber for Chevy Bowtie Emblem Overlay Sheets Front/Back Vinyl Decal Wrap (Blue)

5.0 Write Review
Free shipping on orders over $29.99

$4.32

$ 2 .15 $2.15

In Stock

1.ColourName:White


About this item

  • Compatible with Chevrolet Silverado 1500 Truck, Tahoe SUV, Passenger Van, Impala, Malibu, Aveo, Cruze, Captiva, Spark Sonic Equinox, Avalanche, Suburban, Colorado, Trailblazer, Cobalt, Cavalier, Camaro, Cars
  • FLEXIBLE - When heated and stretched it can be applied to extreme curved surfaces with a little patience and work
  • EASY PLACEMENT - 3M 1080 Wrap Allows for the film to be repositioned on the substrate until the correct position is achieved. As soon as firm squeegee pressure is applied an initial bond is achieved non-visible air release channels to give fast, easy and bubble-free installations


This is to cover one full emblem. The emblem only need 2 packs, we send it in 3 packs so that you can practise and learn how to make it perfect. Instructions: TOOLS NEEDED: Vinyl Sheet Razor Blade Credit Card or Squeegee Hair Dryer or Heat Gun STEPS: 1） Remove all dirt from the emblem using window cleaner. Finish cleaning with rubbing alcohol. 2） Remove the white paper backing from vinyl sheet, ensuring the sheet does not fold over on itself or become crinkled. 3） Carefully apply the vinyl sheet over the emblem, ensuring the vinyl covers the entire letter. 4）Using a squeegee or credit card, smooth the vinyl sheet on to the emblem. Work from the center of the emblem outwards smoothing out any bubbles or imperfections. 5. Use a hair dryer or heat gun to slightly heat up the vinyl sheet to help cover the curved surfaces of the emblem. You can use a credit card edge to help push the vinyl into the cavity around the main emblem. 6. Using the razor blade, carefully cut around the emblem to remove any excess vinyl. 7. If any air bubbles still exist, pop with a needle or allow to fade over time in the sun. Tips: 1. Wait a week before driving through a car wash. 2. Cut carefully and slowly, making sure to stop when reaching the interior edge of the chrome emblem frame. This will ensure you do not scratch any part of your emblem. 3. The red letter portion of the emblem must be within 4" X6" Package Icluded： 3 X Regular 5" X11" Vinyl Sheets.